Paper Tray Settings
After loading paper in the paper tray, set information of loaded paper such as the paper size, the paper type, and the paper color.
Refer
For how to load paper, refer to User Guide.
- Tap on
> [Device] > [Paper Tray Settings]. - Tap on a tray to change its paper settings.
Refer
Refer to [Common Settings] for [Common Settings] displayed in Administrator Mode.
- As needed, configure the setting items.
Item
Details
[Envelope Feeder]
Apply a check mark when using the envelope holder. This item will not be displayed when [Use Envelope Feeder] is disabled. For details, refer to [Other Settings].
[Paper Size]
[Auto Detect]: The machine specifies the paper size automatically.
[Manual Size Input]: Enter the paper size you use.
[Paper Type]
Set the paper type.
[Paper Color]
Set the paper color.
[Auto Tray Switching]
Set whether to use this tray automatically, when paper specified by a user is loaded, or when paper on the tray in use run out in the middle of a job.
Note
You can set this item in Administrator Mode.
[Priority]
If [Auto Tray Switching] is enabled, set a priority of this tray when there are several trays to be switched.
Note
You can set this item in Administrator Mode.
[Auto Paper Select]
Sets the conditions to select paper.
Note
You can set this item in Administrator Mode.
[Standard Size Defaults]
If tray 5 (bypass) was selected, set the paper size displayed for tray 5 in [Paper Supply] from the features list.
Note
You can set this item in Administrator Mode.
- Tap on [OK].