[Covers/Separators] Screen

This screen is displayed by clicking [Covers/Separators] on the [Tray / Output] tab.

It enables you to insert blank covers at the first or last page of the document or insert blank sheets before the specified pages.

[Add Front Cover]

Select this check box to insert a front cover at the start of the document to print.

• This item is deselected when [Poster] is selected or [Divide] is set to something other than [Off].

[Print on Front Cover]

Select this check box to print the first page of the document on the front cover.

[Front Cover Tray]

Select the tray where the paper to insert as the front cover is loaded.

[Add Back Cover]

Select this check box to insert a back cover at the end of the document to print.

• This item is deselected when [Poster] or [Booklet] is selected.
• The back cover cannot be printed on.

[Back Cover Tray]

Select the tray where the paper to insert as the back cover is loaded.

[Insert Separators]

Select this check box to insert separators within the document to print.

• This item is deselected when [Poster] or [Booklet] is selected.

[Separator Tray]

Select the tray where the paper to insert as the separators is loaded.

[Separator Locations]

After selecting [Insert Separators], configures the position to insert the separators.

[Bypass Paper Type]

Configures the type and weight of the paper to feed from the bypass tray.