Registering Non-Standard Paper Sizes

If you cannot find the paper size you want, you can register it as a custom paper size.

By registering a custom paper size, the registered custom paper size can be selected in [Paper Size] and [Output Paper Size] on the [Basic] tab.

1. Click the [Basic] tab.
2. Select [Custom Paper Size] in [Paper Size].
3. Select the [Create a New Form] check box.
4. In [Name], enter the paper name of the custom paper size to register.
   Enter the paper name using 31 characters or less.
5. Configure the sizes in [Width] and [Length].
6. To share the new custom paper size with other users and printers, select the [Share it with Other Users] check box.
7. Click [Save].
8. Click [OK].

• The [Custom Paper Size] screen can also be displayed by selecting [Custom Paper Size] on the [Device Settings] tab then clicking [Settings].
• If you select [Share it with Other Users], you can create a maximum of 50 custom paper sizes. If not, you can create a maximum of 20 custom paper sizes, but they cannot be shared with other users and printers. The names and sizes of paper are defined on the [Custom Paper Size] screen.
• When custom paper sizes shared with other users are changed, the paper size used by the other users and printers are also changed.
• The maximum number of characters for a paper name may not be available, depending on the characters that are entered.
• If the following range is specified for [Custom Paper Size] in [Paper Size] in the FUJIFILM IWpro Print Tool, an upload error will occur.
  [Width]: 89 to 90 mm or 3.5 to 3.54 inches
  [Length]: 98 to 127 mm or 3.85 to 5 inches