Protocol Settings - SNTP

This page allows you to configure the settings for SNTP.
The following settings will become active after rebooting the printer from CentreWare Internet Services or manually turning off and on the printer.
Turning off your printer will clear the data in the main memory but not the one stored in the optional device memory, if installed.

IP Address / Host Name
Enter the host name within 255 bytes. The characters that can be entered include alphanumeric characters, periods (.), and hyphens (-).

Connection Timeout
Set the time to wait for a response from the web browser. The timeout period can be set within the range of 1 to 120 seconds.

Time Synchronization Interval
Allows you to enter an interval for synchronizing the time on the printer. The time interval can be set within the range of 1 to 500 seconds.

Last Connection Time
Displays the last time when the printer synchronized with the server.

Connection Status
Displays the messages according to the status of connection to the server.

[Apply] button
[Undo] button