Protocol Settings - FTP

This page allows you to configure the settings for FTP.

Connection Timeout
Set the connection timeout period of FTP. When the reception of data stops before receiving the entire data, the FTP connection to the printer will time out after the time period set here. The timeout period can be set within the range of 1 to 1,000 seconds.
This setting will become active after rebooting the printer from CentreWare Internet Services or manually turning off and on the printer.
Turning off your printer will clear the data in the main memory but not the one stored in the optional device memory, if installed.

Password
When using a password to access FTP, enter the password in the text box. The password should be entered within 7 bytes. The characters that can be entered include alphanumeric characters, hyphens (-), and underscores (_).
The password is displayed in circles (●), regardless of whether it has already been set or not.
To enter a password, delete all the circles and then enter the password. To clear a password, leave the text box blank.
The asterisks (*) may be displayed instead of circles.

Re-enter Password
Re-enter the password entered in [Password] for verification.

[Apply] button
[Undo] button