Fax - Fax Settings

This page allows you to configure the settings for Fax.

Sent Fax Forward


Sent Fax Forward
Select a setting for sent fax forward.
This setting becomes active after rebooting the printer from CentreWare Internet Services or manually turning off and on the printer.


• Off
• Forword
• Print and Forward
• Print and E-mail
• Forward to Server
• Print and Forward to Server


Forward to Fax Settings


Forwarding Number
Enter a forwarding number within 50 bytes. You can also use the following symbols.

* # : = -

This setting becomes active after rebooting the printer from CentreWare Internet Services or manually turning off and on the printer.


Forward to E-mail Settings


Forwarding E-mail Address 1-5
Enter the forwarding e-mail addresses within 128 bytes.
A mail address is configured with only "local portion@domain portion" or "local portion". You cannot use a period (.) at the beginning or end of each portion, or you cannot use in succession.
In the "local portion", you can use alphanumeric characters and the following symbols.

! # $ % & ' * + - / = ? ^ _ ´ { | } ~

In the "domain portion", you can use alphanumeric characters, a period (.), a hyphen (-), and an underscore (_).
You can specify up to 5 forwarding e-mail addresses.

Forward to Server Settings


Server Type
Select a server type from [Server (FTP)] or [Computer (SMB)].


Host Address (IP Address or DNS Name)
Enter the server address in IP address or FQDN format using alphanumeric characters within 64 bytes. Periods (.), hyphens (-) and colons (:) are acceptable.


Port Number
Enter the port number in the range specified. The range is 21 or any number between 5000 and 65535 when you select [Server (FTP)] for [Server Type]. When you select [Computer (SMB)], the range is 139, 445 or any number between 5000 and 65535. When the default port number is used, no entry is required.


Login Name (if required by host)
Enter a login name for logging in using alphanumeric characters within 96 bytes. A space is acceptable as a character.


Login Password
Enter a password using within 32 alphanumeric characters. A space is acceptable as a character.
The password is displayed in circles (●), regardless of whether it has already been set or not.
To enter a password, delete all the circles and then enter the password. A blank (null) cannot be set.
The asterisks (*) may be displayed instead of circles.


Re-enter Password
Re-enter the password entered in [Login Password] for verification.


Name of Shared Directory
Enter a share name of the SMB server using alphanumeric characters within 32 bytes. A space is acceptable as a character.


Subdirectory Path (optional)
Enter the server path using alphanumeric characters within 96 bytes. A space is acceptable as a character.